Ball Valves NewsIPS                    A ball valve is a valve that opens by turning a handle, gearbox or other actuation methods attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you "see" the valve's position, position indicators will be applied to gearbox or actuators when required. Ball valves are durable and usually work to achieve perfect shutoff even after years of disuse. They are therefore an excellent choice for shutoff applications. There are two type of ball valve based on the ball type, floating ball valve and trunnion mounted ball valve. Depends on the bore size, ball valve is separated into full port ball valve and reduced port ball valve. There are three type of body styles of ball valve: one-piece, two piece split, three piece split, top entry and welded, FBV ball valves are available in two piece split, three piece split and welded. อ่านต่อ

Gate Valves NewsIPS   A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Typical gate valves should never be used for regulating flow, unless they are specifically designed for that purpose. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss. อ่านต่อ